Products and Services
 

  

  
 
 
Power & Manual Pan Brakes

 

See Details Below

 
 
 
We have a wide range of products and services to offer the metalworking industry.
If there is a task not specified above, please do not hesitate to call and discuss your needs.		  
                                                                                  
  
 
     
 

2mmManual Pan Brake

SPECIFICATIONS

  • Length up to 2450mm/ 8ft

  • Capacity up to 2mm mild steel / 14g mild steel

  • High bending angle of 0-130 degrees

  • Greatest depth of box bent 180 mm

  • Amount of lift of clamping beam 200mm

STRUCTURAL & OPERATING FEATURES

  • SEGMENTED and removable fingers on top clamping beam

  • EXCLUSIVE Segmented and removable fingers on bottom bending apron for turn down 50mm splashbacks etc.

  • Manually operated clamping and bending operation for efficient heavy duty operation of machine

  • High structural rigidity from heavy plate steel box construction with continuous welded seams

  • Special provision for re-setting and aligning the machine throughout it’s lifetime

  • Spherical bearings for smooth ease of operation of the clamping mechanism

  • Replaceable bronze bushes at all points of wear

  • Grease nipples at all wear points

  • Variable combination width of bending fingers (hardened and ground) both clamping and folding

  • Cam adjustment for different Gauges
     
 
 
     
 
2mmPower Pan Brake
AC-Y2420 Manual Clamp/Power Fold
Pan Brake
SPECIFICATIONS
• Length up to 2450mm/ 8ft
• Capacity up to 2mm mild steel / 14g mild steel
• High bending angle of 0-130 degrees
• Greatest depth of box bent 180 mm
• Amount of lift of clamping beam 200mm
• Motor 4kw
• 3 Phase 415Volt
• Pump 21 MPa
STRUCTURAL & OPERATING FEATURES
• SEGMENTED and removable fingers on top clamping beam
• EXCLUSIVE Segmented and removable fingers on BOTTOM BENDING apron for turn down 50mm for splash backs or Air Conditioning turn down
• Manually operated clamping operation for efficient heavy duty operation of machine
• HYDRAULIC OPERATION of bending beam with adjustable preset of Bend angle
• High structural rigidity from heavy plate steel box construction with continuous welded seams
• Special provision for re-setting and aligning the machine throughout it’s lifetime
• Spherical bearings for smooth ease of operation of the clamping mechanism
• Replaceable bronze bushes at all points of wear
• Grease nipples at all wear points
• Variable combination width of bending fingers (hardened and ground) both clamping and folding
• Cam adjustment for different Gauges
 
 
     

Structural & Operating Features

  • Hydraulically operated bending and clamping beam for efficient heavy duty operation

  • High structural rigidity from heavy plate steel box construction with continuous welded seams

  • Bending beam powered by dual hydraulic cylinders.

  • Fully integrated and enclosed electric/hydraulic system with large oil reservoir to maintain low oil temperature.

  • Powerful hydraulic pump provides rapid operation with timer for bend angle

  • High load capacity dual spherical plane bearings utilized at bending beam pivots and over-center clamp     bearings

  • Precise electric/hydraulic controls with manual inching of bending beam

  • Comprehensive equipment protection from electric and hydraulic overload systems

 

  

3mm Power Pan Brake

SPECIFICATIONS

  • 3mm x 2450mm (8ft)

  • Hydraulic Clamp and unclamp from foot switch.

  • Final Clamping is limited to 10mm increments for safety

  • Fingers are high carbon steel, Apron blade high carbon tensile steel 20mm and segmented both are hardened and ground for repeat accuracy.

  • 24 Volt to foot switch. Overload protected

  • Clamping provided by 2 rams, oil delivered through steel pipes. Hydraulic clamping of top beam with 13 individual segmented finger clamps.

  • Unclamp is controlled, to allow the operator to regulate the open height.

  • Apron bed is segmented 11 individual adjustable segments for return fold down of 50mm suitable for splash backs & TDF etc.

  • Automatic and manual control. In auto cycle after clamping start auto apron will come up to angle programmed, apron will return and the head will unclamp by foot pedal control

  • Safety trap bar on apron

  • Motor 5.5Kw

  • Length – 3.5 metres

  • Width – 1.4 metres

  • Height – 1.5 metres

  • Weight – 3ton

  

 

Home | Sales of NEW Metalworking Machinery | Sale of USED Machinery
  Purchasing of Redundant or USED Equipment | Sales of NEW & USED Press Brake Tooling
Re-machining/Repair Press Brake Tooling | Condu Lock Products
  Rollformer Lubricant Degalvaniser
  Sales of NEW & USED Guillotine Blades | Resharpening of Guillotine Blades
  Fitting and Setting of Guillotine Blades | Hydraulic Cylinder Repairs   |
Machine Tool Repairs | Machinery Reconditioning
Machinery & Factory Relocation Service | Machinery Related Fabrication and Guards
Special Purpose Machinery Manufacture | Programmed Maintenance Services  | Contact Us
© 2007 Trevor Foster